Subhash Chandran's CV
Författare
subhash
Last Updated
för 6 år sedan
Licens
Creative Commons CC BY 4.0
Sammanfattning
Subhash Chandran's CV
Created with the AltaCV template.
Subhash Chandran's CV
Created with the AltaCV template.
%%%%%%%%%%%%%%%%%
% This is an sample CV template created using altacv.cls
% (v1.1.4, 27 July 2018) written by LianTze Lim (liantze@gmail.com). Now compiles with pdfLaTeX, XeLaTeX and LuaLaTeX.
%
%% It may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.3 or later is part of all distributions of LaTeX
%% version 2003/12/01 or later.
%%%%%%%%%%%%%%%%
%% If you need to pass whatever options to xcolor
\PassOptionsToPackage{dvipsnames}{xcolor}
%% If you are using \orcid or academicons
%% icons, make sure you have the academicons
%% option here, and compile with XeLaTeX
%% or LuaLaTeX.
% \documentclass[10pt,a4paper,academicons]{altacv}
%% Use the "normalphoto" option if you want a normal photo instead of cropped to a circle
% \documentclass[10pt,a4paper,normalphoto]{altacv}
\documentclass[10pt,a4paper]{altacv}
%% AltaCV uses the fontawesome and academicon fonts
%% and packages.
%% See texdoc.net/pkg/fontawecome and http://texdoc.net/pkg/academicons for full list of symbols.
%%
%% Compile with LuaLaTeX for best results. If you
%% want to use XeLaTeX, you may need to install
%% Academicons.ttf in your operating system's font
%% folder.
% Change the page layout if you need to
\geometry{left=1cm,right=9cm,marginparwidth=6.8cm,marginparsep=1.2cm,top=1.25cm,bottom=1.25cm,footskip=2\baselineskip}
% Change the font if you want to.
% If using pdflatex:
\usepackage[T1]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage[default]{lato}
% If using xelatex or lualatex:
% \setmainfont{Lato}
% Change the colours if you want to
\definecolor{Mulberry}{HTML}{72243D}
\definecolor{SlateGrey}{HTML}{2E2E2E}
\definecolor{LightGrey}{HTML}{666666}
\colorlet{heading}{Sepia}
\colorlet{accent}{Mulberry}
\colorlet{emphasis}{SlateGrey}
\colorlet{body}{LightGrey}
% Change the bullets for itemize and rating marker
% for \cvskill if you want to
\renewcommand{\itemmarker}{{\small\textbullet}}
\renewcommand{\ratingmarker}{\faCircle}
%% sample.bib contains your publications
\addbibresource{sample.bib}
\usepackage[colorlinks]{hyperref}
\begin{document}
\name{SUBHASH CHANDRAN K.K}
\tagline{PROJECT ENGINEER }
\photo{2.8cm}{Globe_High}
\personalinfo{%
% Not all of these are required!
% You can add your own with \printinfo{symbol}{detail}
\email{subhashchandrankk@gmail.com }
\phone{000-00-0000}
\mailaddress{Elambilakkal(Hose),Calicut airport(Po),Kondotty, Malappuram }
\location{Keral ,India}
\homepage{www.homepage.com}
\twitter{@twitterhandle}
\linkedin{linkedin.com/in/yourid}
\github{github.com/yourid}
%% You MUST add the academicons option to \documentclass, then compile with LuaLaTeX or XeLaTeX, if you want to use \orcid or other academicons commands.
% \orcid{orcid.org/0000-0000-0000-0000}
}
%% Make the header extend all the way to the right, if you want.
\begin{fullwidth}
\makecvheader
\end{fullwidth}
%% Depending on your tastes, you may want to make fonts of itemize environments slightly smaller
% \AtBeginEnvironment{itemize}{\small}
%% Provide the file name containing the sidebar contents as an optional parameter to \cvsection.
%% You can always just use \marginpar{...} if you do
%% not need to align the top of the contents to any
%% \cvsection title in the "main" bar.
\cvsection[page1sidebar]{Experience}
\cvevent{Project Engineer}{Meltrax Electro mechanical&Communication Systems}{February 2018 -- Ongoing}{Calicut,Kerala}
\begin{itemize}
\item Solar Project Management,Design,&Implementation
\item Detailed Studying of RFQ & Make Quotation for Project in the countries Sudan,Papua New guinea for their transmission and distribution and Communication systems.
\end{itemize}
\divider
\cvevent{Technical assistant}{National Institute of technology -NIT Calicut}{January 2018 -- February}{Calicut,Kerala}
\begin{itemize}
\item Have wide and proper knowledge in electrical machines and their characteristics
\item Conveying detailed information regarding with the Electrical machines and their characteristics, Experiments in the laboratory
\end{itemize}
\cvsection{Projects}
\cvevent{Project 1}{Funding agency/institution}{Project duration}{}
\begin{itemize}
\item Details
\end{itemize}
\divider
\cvevent{Project 2}{Funding agency/institution}{Project duration}{}
A short abstract would also work.
\medskip
\cvsection{A Day of My Life}
% Adapted from @Jake's answer from http://tex.stackexchange.com/a/82729/226
% \wheelchart{outer radius}{inner radius}{
% comma-separated list of value/text width/color/detail}
\wheelchart{1.5cm}{0.5cm}{%
6/8em/accent!30/{Sleep,\\beautiful sleep},
4/8em/accent!8/{Watching news},
3/7em/accent!8/Meeting &Talking with friends,
8/8em/accent!55/Day time Job,
2/10em/accent!10/Sports and relaxation,
5/6em/accent!20/Spending time with family
}
\clearpage
\cvsection[page2sidebar]{Publications}
\nocite{*}
\printbibliography[heading=pubtype,title={\printinfo{\faBook}{Books}},type=book]
\divider
\printbibliography[heading=pubtype,title={\printinfo{\faFileTextO}{Journal Articles}},type=article]
\divider
\printbibliography[heading=pubtype,title={\printinfo{\faGroup}{Conference Proceedings}},type=inproceedings]
%% If the NEXT page doesn't start with a \cvsection but you'd
%% still like to add a sidebar, then use this command on THIS
%% page to add it. The optional argument lets you pull up the
%% sidebar a bit so that it looks aligned with the top of the
%% main column.
% \addnextpagesidebar[-1ex]{page3sidebar}
\end{document}